Batch CAD Cart (0)
  • Cart is empty
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

Design Unit

Metric

d - Bore

150 mm

Cage Type

EMB

Cage Material

Brass

Superseded Part

23330YMBW33W800C3

Dimensions

D - Outer Diameter

319.993 mm12.5981 in

B' - Inner Ring Width

128 mm5.0394 in

B - Outer Ring Width

128 mm5.0394 in

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 3 mm0.120 in
r - Outer Ring "To Clear" Radius2 3 mm0.12 in

da - Inner Ring Backing Diameter

185 mm7.3000 in

Da - Outer Ring Backing Diameter

280.000 mm11.000 in

Basic Load Ratings

C0 - Static Radial Rating

2130000 N479000 lbf

C1(2) - Dynamic Radial Rating (Two-Rows)

1780000 N400000 lbf

Factors

e - ISO Factor3 0.41
Y0 - ISO Factor4 1.6
Y1 - ISO Factor5 1.64
Y2 - ISO Factor6 2.44

Reference Thermal Speed Rating (Grease)

1000 rpm
Reference Thermal Speed Rating (Oil)7 1100 rpm
Cg - Geometry Factor8 0.0871
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 See thermal speed ratings in the engineering section.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.