Batch CAD Cart (0)
  • Cart is empty
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

Design Unit

Metric

d - Bore

200 mm

Cage Type

EMB

Cage Material

Brass

Superseded Part

24140YMBW33W40EC2

Dimensions

D - Outer Diameter

340 mm13.3858 in

B' - Inner Ring Width

140 mm5.5118 in

B - Outer Ring Width

140 mm5.5118 in

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 2.5 mm0.100 in
r - Outer Ring "To Clear" Radius2 2.5 mm0.1 in

da - Inner Ring Backing Diameter

226.000 mm8.900 in

Da - Outer Ring Backing Diameter

308 mm12.1000 in

Basic Load Ratings

C0 - Static Radial Rating

2930000 N658000 lbf

C1(2) - Dynamic Radial Rating (Two-Rows)

2030000 N456000 lbf

Factors

e - ISO Factor3 0.39
Y0 - ISO Factor4 1.7
Y1 - ISO Factor5 1.74
Y2 - ISO Factor6 2.59

Reference Thermal Speed Rating (Grease)

790 rpm
Reference Thermal Speed Rating (Oil)7 850 rpm
Cg - Geometry Factor8 0.097
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 See thermal speed ratings in the engineering section.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.