Batch CAD Cart (0)
  • Cart is empty
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

Design Unit

Metric

d - Bore

220 mm

Cage Type

EMB

Cage Material

Brass

Superseded Part

24144YMBW33

Dimensions

D - Outer Diameter

370 mm14.5669 in

B' - Inner Ring Width

150 mm5.9055 in

B - Outer Ring Width

150 mm5.9055 in

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 3 mm0.120 in
r - Outer Ring "To Clear" Radius2 3 mm0.12 in

da - Inner Ring Backing Diameter

248.000 mm9.8000 in

Da - Outer Ring Backing Diameter

337 mm13.3000 in

Basic Load Ratings

C0 - Static Radial Rating

3220000 N725000 lbf

C1(2) - Dynamic Radial Rating (Two-Rows)

2250000 N505000 lbf

Factors

e - ISO Factor3 0.36
Y0 - ISO Factor4 1.82
Y1 - ISO Factor5 1.86
Y2 - ISO Factor6 2.77

Reference Thermal Speed Rating (Grease)

720 rpm
Reference Thermal Speed Rating (Oil)7 780 rpm
Cg - Geometry Factor8 0.1027
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 See thermal speed ratings in the engineering section.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.