Batch CAD Cart (0)
  • Cart is empty
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

Design Unit

Metric

d - Bore

240 mm

Cage Type

EMB

Cage Material

Brass

Superseded Part

26348YMBW33W45A

Dimensions

D - Outer Diameter

460 mm18.1100 in

B' - Inner Ring Width

147 mm5.787 in

B - Outer Ring Width

147 mm5.7870 in

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 4 mm0.160 in
r - Outer Ring "To Clear" Radius2 4 mm0.16 in

da - Inner Ring Backing Diameter

286 mm11.270 in

Da - Outer Ring Backing Diameter

410.000 mm16.150 in

Basic Load Ratings

C0 - Static Radial Rating

3690000 N829000 lbf

C1(2) - Dynamic Radial Rating (Two-Rows)

2910000 N653000 lbf

Factors

e - ISO Factor3 0.32
Y0 - ISO Factor4 2.04
Y1 - ISO Factor5 2.08
Y2 - ISO Factor6 3.1

Reference Thermal Speed Rating (Grease)

580 rpm
Reference Thermal Speed Rating (Oil)7 690 rpm
Cg - Geometry Factor8 0.1133
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 See thermal speed ratings in the engineering section.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.