Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    L Type Spiders - Open Center
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > INDUSTRIAL MOTION PRODUCTS > Couplings & Power Transmission Parts Catalog > Jaw Couplings > L Type (Standard Jaw) Components > L Type Spiders - Open Center > Part Number 68514438097  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number 68514438097, L Type Spiders - Open Center


The L Type coupling consists of two standard L Type hubs and one spider.



Unit of Measure: Imperial Metric Both

Specifications  · Dimensional Data  · Dimensional Data of Related Coupling  · Performance Data  · Spider Performance  · Elastomers in Compression

Specifications

Description 
L/AL110-SPIDER OCT-HYTREL-1-3/16

Coupling Type
Jaw

Material
Hytrel®

Insert Style
Open Center

Color
Tan

Type
Elastomeric Insert

Weight
0.15 lb


Dimensional Data

Coupling Size
L110, AL110

Dimension A
3.310 in
84.07 mm

Dimension B
0.450 in
11.43 mm

Dimension H
1.180 in
29.97 mm

Dimension W
0.75 in
19.05 mm

Cubic inches
8.21708 in³


Dimensional Data of Related Coupling

Max. Bore (Dimensions ID1/ID2)
1.625 in
42 mm


Performance Data

Normal Temperature Range
-60 to 250 ºF
-51 to 121 ºC

Nominal Torque
2268.00 in·lb
256.00 N·m

Angular Misalignment
0.50 º

Parallel Misalignment
0.0150 in

Shore Hardness
55D

Damping Capacity
Low

Chemical Resistance
Excellent


Spider Performance
  • Hytrel is a flexible elastomer designed for high torque and high temperature operations. Hytrel can operate in temperatures of -60° to 250° F (-51° to 121° C) and has an excellent resistance to oil and chemicals. Not recommended for cyclic or start/stop applications.




Elastomers in Compression
    Lovejoy offers four types of elastomer designs to allow for additional flexibility in addressing specific application requirements. One piece designs are used in the “L” and “AL” models (referred to as spiders) and multiple part “load cushions” are used in the “C” and “H” model couplings. The load cushions are in sets of 6 to 14 pieces depending on coupling size.
Solid Center Spider
  • The solid center design is commonly used design when shafts of the driver and driven equipment can be kept separate by a standard gap
Open Center Spider
  • The open center design allows for the shafts of the driver and driven to be positioned within a short distance
  • Open center spiders offer shaft positioning flexibility but have a lower RPM capacity (1,750 RPM maximum for NBR, 3,600 maximum for Urethane/Hytrel®)
Cushions
  • Used exclusively for the C and H Type couplings
  • Load cushions are held in place radially by a steel collar which is attached to one of the hubs
Snap Wrap Flexible Spider
  • Design allows for easy removal of the spider without moving the hubs
  • Allows for close shaft separation all the way up to the hubs maximum bore
  • Maximum RPM is 1,750 RPM with the retaining ring, but if used with the LC Type (with collar) the normal RPM rating of the coupling applies
  • Style is available in NBR and Urethane only, and in limited sizes


 MORE IMAGES 

·  Snap Wrap Flexible Spiders - Metric-2

·  Solid Center Spiders - Metric


 DOWNLOADS 

Jaw Type Catalog (pdf catalog)

Installation Instructions for Jaw Type Couplings

Installation Video for Jaw Type Couplings


Add To Cart Request Quote
<