All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - 2TS (Matched Bearing Assembly) > Tapered Roller Bearings - 2S (Matched Bearing Assembly, with snap ring spacer) > Part Number LM11749 - LM11710 (K106398R - K106397R)  

Part Number LM11749 - LM11710 (K106398R - K106397R), Tapered Roller Bearings - 2S (Matched Bearing Assembly, with snap ring spacer)

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Tapered Roller Bearings - 2S (Matched Bearing Assembly, with snap ring spacer)




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Cone Part Number
LM11749

Cup Part Number
LM11710

Inner Spacer Part Number
K106398R

Outer Spacer Part Number
K106397R

Design Unit
Inch


Dimensions

d - Bore
11/16 in
17.463 mm

D - Cup Outer Diameter
1.5700 in
39.878 mm

T - Width
1.1900 in
30.226 mm

C - Width
0.9400 in
23.876 mm

Snap Ring Diameter
1.65 in
41.91 mm

Snap Ring Width
0.10 in
2.54 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.050 in
1.270 mm

r - Cup Backface "To Clear" Radius2
0.050 in
1.27 mm

db - Cone Backface Backing Diameter
0.94 in
24 mm

Da - Cup Frontface Backing Diameter
1.48 in
37.59 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)
1710 lbf
7610 N

C1 - Dynamic Radial Rating (1 million revolutions)1
11500 lbf
51100 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)2
838 lbf
3730 N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)3
2980 lbf
13300 N
1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
2.04

e - ISO Factor2
0.29

Y1 - ISO Factor3
2.36

Y2 - ISO Factor4
3.51
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.


 MORE IMAGES 

·  timken-2TS-IMSS-SR-cutaway-angle-view

·  timken-2TS-IMSS-SR-left-angle-view

·  Timken TRB 2S



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances

Tools and Guides for Engineers