All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - 2TS (Matched Bearing Assembly) > Tapered Roller Bearings - 2TS-DM (Matched Bearing Assembly, Direct Mount) > Part Number EE640192 - 640260 (K735943)  

Part Number EE640192 - 640260 (K735943), Tapered Roller Bearings - 2TS-DM (Matched Bearing Assembly, Direct Mount)

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Tapered Roller Bearings - 2TS-DM (Matched Bearing Assembly, Direct Mount)




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Cone Part Number
EE640192

Cup Part Number
640260

Related Assembly Number(s)
EE640192-902C2

Outer Spacer Part Number
K735943

Design Unit
Inch


Dimensions

d - Bore
19.2500 in
488.950 mm

D - Cup Outer Diameter
26.0 in
660.400 mm

T - Width
7.375 in
187.325 mm

B - Width
7.4376 in
188.916 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.06 in
1.5 mm

r - Cup Backface "To Clear" Radius2
0.250 in
6.35 mm

db - Cone Backface Backing Diameter
20.55 in
522 mm

Da - Cup Frontface Backing Diameter
24.91 in
632.71 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
138000 lbf
614000 N

C1 - Dynamic Radial Rating (1 million revolutions)2
928000 lbf
4130000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
72600 lbf
323000 N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)4
240000 lbf
1070000 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.9

e - ISO Factor2
0.31

Y1 - ISO Factor3
2.2

Y2 - ISO Factor4
3.27
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.


 MORE IMAGES 

·  timken-2TS-DM-24-OD-pin-cage-cutaway-angle-view

·  timken-2TS-DM-24-OD-pin-cage-left-angle-view

·  Timken TRB 2TS-DM



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances

Tools and Guides for Engineers



 NEW PRODUCT OFFERING 


HPTO34S1-M-Angle-R
PT Tech