All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - 2TS (Matched Bearing Assembly) > Tapered Roller Bearings - 2TS-DM (Matched Bearing Assembly, Direct Mount) > Part Number JM719149 - JM719113 (H217210EA)  

Part Number JM719149 - JM719113 (H217210EA), Tapered Roller Bearings - 2TS-DM (Matched Bearing Assembly, Direct Mount)

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Tapered Roller Bearings - 2TS-DM (Matched Bearing Assembly, Direct Mount)




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Cone Part Number
JM719149

Cup Part Number
JM719113

Outer Spacer Part Number
H217210EA

Design Unit
Metric


Dimensions

d - Bore
3.7402 in
95 mm

D - Cup Outer Diameter
5.9055 in
150 mm

T - Width
2.7559 in
70 mm

B - Width
2.6772 in
68.000 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.010 in
0.3 mm

r - Cup Backface "To Clear" Radius2
0.1 in
2.54 mm

db - Cone Backface Backing Diameter
4.29 in
109 mm

Da - Cup Frontface Backing Diameter
5.64 in
143.26 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
12500 lbf
55700 N

C1 - Dynamic Radial Rating (1 million revolutions)2
84000 lbf
374000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
9470 lbf
42100 N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)4
21800 lbf
96900 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.32

e - ISO Factor2
0.44

Y1 - ISO Factor3
1.53

Y2 - ISO Factor4
2.27
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.


 MORE IMAGES 

·  timken-2TS-DM-24-OD-pin-cage-cutaway-angle-view

·  timken-2TS-DM-24-OD-pin-cage-left-angle-view

·  Timken TRB 2TS-DM



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances

Tools and Guides for Engineers



 NEW PRODUCT OFFERING 


HPTO34S1-M-Angle-R
PT Tech