All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - 2TS (Matched Bearing Assembly) > Tapered Roller Bearings - 2TS-IM (Matched Bearing Assembly, Indirect Mount) > Part Number 31597 - 31520 (K164877 - K164878)  

Part Number 31597 - 31520 (K164877 - K164878), Tapered Roller Bearings - 2TS-IM (Matched Bearing Assembly, Indirect Mount)

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Tapered Roller Bearings - 2TS-IM (Matched Bearing Assembly, Indirect Mount)




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Cone Part Number
31597

Cup Part Number
31520

Inner Spacer Part Number
K164877

Outer Spacer Part Number
K164878

Design Unit
Inch


Dimensions

d - Bore
1 7/16 in
36.513 mm

D - Cup Outer Diameter
3 in
76.2 mm

T - Width
3.3071 in
84 mm

C - Width
2.8695 in
72.884 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.14 in
3.600 mm

r - Cup Backface "To Clear" Radius2
0.030 in
0.8 mm

db - Cone Backface Backing Diameter
2.01 in
51 mm

Da - Cup Frontface Backing Diameter
2.87 in
71.90 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
5520 lbf
24600 N

C1 - Dynamic Radial Rating (1 million revolutions)2
37100 lbf
165000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
3800 lbf
16900 N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)4
9610 lbf
42800 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.45

e - ISO Factor2
0.4

Y1 - ISO Factor3
1.68

Y2 - ISO Factor4
2.5
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.


 MORE IMAGES 

·  timken-2TS-IM-4-8OD-cutaway-angle-view

·  timken-2TS-IM-4-8OD-left-angle-view

·  Timken TRB 2TS-IM



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances

Tools and Guides for Engineers



 NEW PRODUCT OFFERING 


HPTO34S1-M-Angle-R
PT Tech