All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - 2TS (Matched Bearing Assembly) > Tapered Roller Bearings - 2TS-IM (Matched Bearing Assembly, Indirect Mount) > Part Number HM218248 - HM218210 (K769618 - K962723)  

Part Number HM218248 - HM218210 (K769618 - K962723), Tapered Roller Bearings - 2TS-IM (Matched Bearing Assembly, Indirect Mount)

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Tapered Roller Bearings - 2TS-IM (Matched Bearing Assembly, Indirect Mount)




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Cone Part Number
HM218248

Cup Part Number
HM218210

Inner Spacer Part Number
K769618

Outer Spacer Part Number
K962723

Design Unit
Inch


Dimensions

d - Bore
3.5423 in
89.974 mm

D - Cup Outer Diameter
5.7864 in
146.975 mm

T - Width
4.5446 in
115.433 mm

C - Width
3.954 in
100.433 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.280 in
7.110 mm

r - Cup Backface "To Clear" Radius2
0.030 in
0.8 mm

db - Cone Backface Backing Diameter
4.41 in
112 mm

Da - Cup Frontface Backing Diameter
5.57 in
141.00 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
18900 lbf
84200 N

C1 - Dynamic Radial Rating (1 million revolutions)2
127000 lbf
565000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
10800 lbf
47900 N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)4
33000 lbf
147000 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.76

e - ISO Factor2
0.33

Y1 - ISO Factor3
2.03

Y2 - ISO Factor4
3.02
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.


 MORE IMAGES 

·  timken-2TS-IM-4-8OD-cutaway-angle-view

·  timken-2TS-IM-4-8OD-left-angle-view

·  Timken TRB 2TS-IM



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances

Tools and Guides for Engineers



 NEW PRODUCT OFFERING 


HPTO34S1-M-Angle-R
PT Tech