All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - 2TS (Matched Bearing Assembly) > Tapered Roller Bearings - 2TS-IM (Matched Bearing Assembly, Indirect Mount) > Part Number JLM714149 - JLM714110  

Part Number JLM714149 - JLM714110, Tapered Roller Bearings - 2TS-IM (Matched Bearing Assembly, Indirect Mount)

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Tapered Roller Bearings - 2TS-IM (Matched Bearing Assembly, Indirect Mount)




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Cone Part Number
JLM714149

Cup Part Number
JLM714110

Outer Spacer Part Number
XC14638-SC

Design Unit
Metric


Dimensions

d - Bore
2.9528 in
75 mm

D - Cup Outer Diameter
4.5276 in
115 mm

T - Width
2.1760 in
55.270 mm

C - Width
1.7035 in
43.270 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.12 in
3.050 mm

r - Cup Backface "To Clear" Radius2
0.020 in
0.5 mm

db - Cone Backface Backing Diameter
3.46 in
88 mm

Da - Cup Frontface Backing Diameter
4.37 in
111.00 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
8180 lbf
36400 N

C1 - Dynamic Radial Rating (1 million revolutions)2
54900 lbf
244000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
6420 lbf
28600 N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)4
14200 lbf
63400 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.27

e - ISO Factor2
0.46

Y1 - ISO Factor3
1.47

Y2 - ISO Factor4
2.19
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.


 MORE IMAGES 

·  timken-2TS-IM-4-8OD-cutaway-angle-view

·  timken-2TS-IM-4-8OD-left-angle-view

·  Timken TRB 2TS-IM



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances

Tools and Guides for Engineers