All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Double Cones > Tapered Roller Bearings - Double Tapered Cones - Imperial > Part Number M667947ADW  

Part Number M667947ADW, Tapered Roller Bearings - Double Tapered Cones - Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

TDI bearings have a one-piece double inner race and two single outer races and are typically supplied complete with an outer race spacer as a pre-set assembly. The bearing can be used at fixed positions on rotation shaft applications. For rotating housing application it can be used to float on the stationary shaft.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
M667900

Cone Part Number
M667947ADW

Design Units
Imperial

Cage Type
Stamped Steel

C1 - Dynamic Radial Rating (1 million revolutions)1
380000 lbf
1690000 N

C0 - Static Radial Rating
768000 lbf
3420000 N
1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.


Dimensions

d - Cone Bore
16.1250 in
409.575 mm

B - Double Cone Width
6.3750 in
161.925 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.08 in
2 mm

da - Cone Frontface Backing Diameter
16.97 in
431 mm

Ab - Cage-Cone Frontface Clearance
0.19 in
4.8 mm
1 These maximum fillet radii will be cleared by the bearing corners.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
98500 lbf
438000 N

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)2
661000 lbf
2940000 N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)3
171000 lbf
763000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)4
70400 lbf
313000 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.4

Cg - Geometry Factor2
0.223
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances