All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Double Cups > Tapered Roller Bearings - Double Tapered Cup - Imperial > Part Number 43319DC  

Part Number 43319DC, Tapered Roller Bearings - Double Tapered Cup - Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

The configuration of the TDO provides a wide effective bearing spread, making it ideal for applications in which overturning moments are a significant load component. TDO bearings can be used in fixed positions or allowed to float in the housing bore.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Factors

Specifications

Series
43000

Cup Part Number
43319DC

Design Units
Imperial


Dimensions

D - Cup Outer Diameter
3.1875 in
80.963 mm

C - Double Cup Width
1.5625 in
39.688 mm


Abutment and Fillet Dimensions

r - Cup Backface "To Clear" Radius1
0.06 in
1.5 mm

Da - Cup Frontface Backing Diameter
2.94 in
73.91 mm
1 These maximum fillet radii will be cleared by the bearing corners.


Factors

K - Factor1
0.87

e - ISO Factor2
1.67

Y1 - ISO Factor3
0.41
0.6

Y2 - ISO Factor4
0.6

G1 - Heat Generation Factor (Roller-Raceway)
16.8

G2 - Heat Generation Factor (Rib-Roller End)
7.57

Cg - Geometry Factor5
0.0774
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
5 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances