All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Double Cups > Tapered Roller Bearings - Double Tapered Cup - Imperial > Part Number LL714610D  

Part Number LL714610D, Tapered Roller Bearings - Double Tapered Cup - Imperial


    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

The configuration of the TDO provides a wide effective bearing spread, making it ideal for applications in which overturning moments are a significant load component. TDO bearings can be used in fixed positions or allowed to float in the housing bore.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Factors

Specifications

Series

LL714600

Cup Part Number

LL714610D

Design Units

Imperial


Dimensions

D - Cup Outer Diameter

4.1563 in
105.570
mm

C - Double Cup Width

0.9374 in
23.810
mm


Abutment and Fillet Dimensions

r - Cup Backface "To Clear" Radius1

0.030 in
0.8
mm

Da - Cup Frontface Backing Diameter

4.06 in
102.11
mm
1 These maximum fillet radii will be cleared by the bearing corners.


Factors

K - Factor1

1.24

e - ISO Factor2

1.05

Y1 - ISO Factor3

0.64
0.96

Y2 - ISO Factor4

0.96

Cg - Geometry Factor5

0.0956
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
5 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances