All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Double Cups > Tapered Roller Bearings - Double Tapered Cup - Imperial > Part Number LM251610D  

Part Number LM251610D, Tapered Roller Bearings - Double Tapered Cup - Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

The configuration of the TDO provides a wide effective bearing spread, making it ideal for applications in which overturning moments are a significant load component. TDO bearings can be used in fixed positions or allowed to float in the housing bore.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Factors

Specifications

Series
LM251600

Cup Part Number
LM251610D

Design Units
Imperial


Dimensions

D - Cup Outer Diameter
13.875 in
352.425 mm

C - Double Cup Width
3.25 in
82.55 mm


Abutment and Fillet Dimensions

r - Cup Backface "To Clear" Radius1
0.06 in
1.524 mm

Da - Cup Frontface Backing Diameter
13.39 in
340.106 mm
1 These maximum fillet radii will be cleared by the bearing corners.


Factors

K - Factor1
1.83

e - ISO Factor2
0.32

Y1 - ISO Factor3
2.12

Y2 - ISO Factor4
3.15

G1 - Heat Generation Factor (Roller-Raceway)
1402

G2 - Heat Generation Factor (Rib-Roller End)
234
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances