Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.

RELATED PRODUCTS

Unit of Measure

Key Dimensions

Cone Part Number

 N/A JHH224333

Bore (d)

 N/A 100 mm3.937 in
Dynamic Radial Load Rating - 1M Revs (C1) 1 N/A 680000 N153000 lbf
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 176000 N39600 lbf
K Factor 3 N/A 1.79

Other Dimensions

Weight

 N/A 11.5 Kg25.40 lb

Inner Ring Width (B)

 N/A 66.675 mm2.6250 in
Effective Center Location4 N/A -18.9 mm-0.74 in
Max Shaft Fillet Radius5 N/A 7.110 mm0.280 in

Shaft Backing Shoulder Dia. - Frontface (da)

 N/A 120 mm4.72 in

Shaft Backing Shoulder Dia. - Backface (db)

 N/A 131 mm5.16 in

Cage Location rel. to BF (Aa)

 N/A 4.1 mm0.16 in

Cage Location rel. to FF (Ab)

 N/A 3.6 mm0.14 in

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)6 N/A 98300 N22100 lbf

Static Radial Load Rating (C0)

 N/A 906000 N204000 lbf

Factors

G1 Factor

 N/A 367

G2 Factor

 N/A 47.8
Geometry Factor (Cg)7 N/A 0.118
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 Negative value indicates effective center inside cone backface.
  • 5 These maximum fillet radii will be cleared by the bearing corners.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 Geometry constant for Lubrication Life Adjustment Factor a3l.