Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.

RELATED PRODUCTS

Unit of Measure

Key Dimensions

Cone Part Number

 N/A JL725346

Bore (d)

 N/A 125 mm4.9213 in
Dynamic Radial Load Rating - 1M Revs (C1) 1 N/A 150000 N33700 lbf
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 38900 N8750 lbf
K Factor 3 N/A 1.23

Other Dimensions

Weight

 N/A 1.70 Kg3.7 lb

Inner Ring Width (B)

 N/A 25.400 mm1.0000 in
Effective Center Location4 N/A 9.1 mm0.36 in
Max Shaft Fillet Radius5 N/A 3.300 mm0.13 in

Shaft Backing Shoulder Dia. - Frontface (da)

 N/A 133 mm5.24 in

Shaft Backing Shoulder Dia. - Backface (db)

 N/A 138 mm5.43 in

Cage Location rel. to BF (Aa)

 N/A 2.3 mm0.09 in

Cage Location rel. to FF (Ab)

 N/A 2.3 mm0.09 in

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)6 N/A 31700 N7130 lbf

Static Radial Load Rating (C0)

 N/A 246000 N55300 lbf

Factors

G1 Factor

 N/A 187

G2 Factor

 N/A 77.6
Geometry Factor (Cg)7 N/A 0.153
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 Negative value indicates effective center inside cone backface.
  • 5 These maximum fillet radii will be cleared by the bearing corners.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 Geometry constant for Lubrication Life Adjustment Factor a3l.