Montage of Timken Bearing Products
Search Catalog
        
 All Product Types    Tapered Roller Bearings - Single Cups - Imperial
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Single Cups > Tapered Roller Bearings - Single Cups - Imperial > Part Number 16929  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number 16929, Tapered Roller Bearings - Single Cups - Imperial



This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.



Unit of Measure: Imperial Metric Both

Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Factors

Specifications

Series

16900

Cup Part Number

16929

Design Units

Imperial


Dimensions

D - Cup Outer Diameter

2.9523 in
74.988
mm

C - Cup Width

0.5625 in
14.288
mm


Abutment and Fillet Dimensions

r - Cup Backface "To Clear" Radius1

0.050 in
1.27
mm

Da - Cup Frontface Backing Diameter

2.83 in
71.88
mm

Db - Cup Backface Backing Diameter

2.68 in
68.07
mm
1 These maximum fillet radii will be cleared by the bearing corners.


Factors

e - ISO Factor1

0.44

Y - ISO Factor2

1.35

Cg - Geometry Factor3

0.0783
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances


Add To Cart Request Quote
<