Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    Tapered Roller Bearings - Single Cups - Imperial
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Single Cups > Tapered Roller Bearings - Single Cups - Imperial > Part Number 592AS  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number 592AS, Tapered Roller Bearings - Single Cups - Imperial


This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.



Unit of Measure: Imperial Metric Both

Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Factors

Specifications

Series
595

Cup Part Number
592AS

Design Units
Imperial


Dimensions

D - Cup Outer Diameter
6 in
152.400 mm

C - Cup Width
1.0312 in
26.192 mm


Abutment and Fillet Dimensions

r - Cup Backface "To Clear" Radius1
0.030 in
0.76 mm

Da - Cup Frontface Backing Diameter
5.71 in
145.03 mm

Db - Cup Backface Backing Diameter
5.39 in
136.91 mm
1 These maximum fillet radii will be cleared by the bearing corners.


Factors

e - ISO Factor1
0.44

Y - ISO Factor2
1.36

Cg - Geometry Factor3
0.142
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances


Add To Cart Request Quote
<