Part Number LM48510-B, Tapered Roller Bearings - Single Flanged Cups

Search Catalog



	All Product Types Tapered Roller Bearings - Single Flanged Cups - Imperial

		\| Shipping \| Tax \| Terms
Shopping Cart	0 Items

Request for Quote	0 Items

All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Single Cups > Tapered Roller Bearings - Single Flanged Cups - Imperial > Part Number LM48510-B


	Part Number LM48510-B, Tapered Roller Bearings - Single Flanged Cups - Imperial

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.

larger image

larger image

Unit of Measure: Imperial Metric Both

Specifications · Dimensions · Abutment and Fillet Dimensions · Factors

Specifications

Series		LM48500

Cup Part Number		LM48510-B

Design Units		Imperial

Dimensions

D - Cup Outer Diameter		2.5625 in 65.088 mm

D1 - Flange Outer Diameter		2.6875 in 68.263 mm

C - Cup Width		0.5500 in 13.970 mm

C1 - Cup Flange Width		0.1250 in 3.175 mm

Abutment and Fillet Dimensions

r - Cup Backface "To Clear" Radius¹

0.050 in
1.3 mm

Da - Cup Frontface Backing Diameter

2.52 in
64.00 mm

¹ These maximum fillet radii will be cleared by the bearing corners.

Factors

K - Factor¹

1.55

e - ISO Factor²

0.38

Y - ISO Factor³

1.59

G1 - Heat Generation Factor (Roller-Raceway)

16.8

G2 - Heat Generation Factor (Rib-Roller End)

9.36

Cg - Geometry Factor⁴

0.0666

¹ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
² These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
³ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
⁴ Geometry constant for Lubrication Life Adjustment Factor a3l.

VIEW CAD DRAWING



· 3D


· 2D Sectional View


· 2D Sales Drawing

DOWNLOADS


		Bearing Life Calculation Tool

		Bearing Dimensional Tolerances

Part Number LM48510-B, Tapered Roller Bearings - Single Flanged Cups - Imperial

Series

Cup Part Number

Design Units

D - Cup Outer Diameter

D1 - Flange Outer Diameter

C - Cup Width

C1 - Cup Flange Width

r - Cup Backface "To Clear" Radius1

Da - Cup Frontface Backing Diameter

K - Factor1

e - ISO Factor2

Y - ISO Factor3