COMPANY HEADER
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
The configuration of the TDO provides a wide effective bearing spread, making it ideal for applications in which overturning moments are a significant load component. TDO bearings can be used in fixed positions or allowed to float in the housing bore.
Unit of Measure

Specifications

Series

 N/A 749000

Cone Part Number

 N/A EE749260

Cup Part Number

 N/A 749335CD

Design Unit

 N/A Inch

Cage Material

 N/A Pin-Type

Related Assembly Number(s)

 N/A EE749260-90036 EE749260-904A7

Dimensions

d - Bore

 N/A 26.0000 in660.400 mm

D - Cup Outer Diameter

 N/A 33.6584 in854.923 mm

B - Cone Width

 N/A 3.3649 in85.468 mm

C - Double Cup Width

 N/A 5.3504 in135.900 mm

T - Bearing Width across Cones

 N/A 7.3358 in186.329 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.380 in9.700 mm
r - Cup Backface "To Clear" Radius2 N/A 0.090 in2.3 mm

db - Cone Backface Backing Diameter

 N/A 27.64 in702 mm

Da - Cup Frontface Backing Diameter

 N/A 32.36 in821.94 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.36 in9.14 mm
a - Effective Center Location3 N/A 1.55 in39.4 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)4 N/A 581000 N
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)5 N/A 877000 lbf3900000 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)6 N/A 227000 lbf1010000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 N/A 78600 lbf349000 N

Factors

K - Factor8 N/A 1.66
e - ISO Factor9 N/A 0.74
Y1 - ISO Factor10 N/A 0.91 1.35
Y2 - ISO Factor11 N/A 1.35
Cg - Geometry Factor12 N/A 0.271
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 11 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 12 Geometry constant for Lubrication Life Adjustment Factor a3l.