All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TDI (Tapered Double Inner) > Tapered Roller Bearings - TDI (Tapered Double Inner) Imperial > Part Number 48290DW - 48220  

Part Number 48290DW - 48220, Tapered Roller Bearings - TDI (Tapered Double Inner) Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

TDI bearings have a one-piece double inner race and two single outer races and are typically supplied complete with an outer race spacer as a pre-set assembly. The bearing can be used at fixed positions on rotation shaft applications. For rotating housing application it can be used to float on the stationary shaft.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors  · Spacer

Specifications

Series
48200

Cone Part Number
48290DW

Cup Part Number
48220

Design Unit
Inch

Cage Material
Stamped Steel

Note
This part has a non-standard shoulder design. Please email customer CAD for shoulder details to ensure the proper design of mating components.

Related Assembly Number(s)
48290DW-90162
48290DW-90163
48290DW-90167
48290DW-90173
48290DW-90174
48290DW-902A6
48290DW-902C3
48290DW-902C6
48290DW-902C7
48290DW-902C8


Dimensions

d - Bore
5 in
127 mm

D - Cup Outer Diameter
7.1875 in
182.563 mm

B - Double Cone Width
3.0000 in
76.200 mm

C - Cup Width
1.3125 in
33.338 mm

T - Bearing Width across Cups
3.0001 in
76.203 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.06 in
1.5 mm

r - Cup Backface "To Clear" Radius2
0.130 in
3.30 mm

da - Cone Frontface Backing Diameter
5.39 in
137 mm

Db - Cup Backface Backing Diameter
6.61 in
167.89 mm

Ab - Cage-Cone Frontface Clearance
0.09 in
2.3 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.


Basic Load Ratings

C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)1
15600 lbf
69400 N

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)2
105000 lbf
466000 N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)3
27200 lbf
121000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)4
8160 lbf
36300 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.91

e - ISO Factor2
0.31

Y1 - ISO Factor3
2.21

Y2 - ISO Factor4
3.29

G1 - Heat Generation Factor (Roller-Raceway)
353

Cg - Geometry Factor5
0.114
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
5 Geometry constant for Lubrication Life Adjustment Factor a3l.


Spacer

Note
Spacer shows standard nominal .01 radii, actual bearing may vary


 MORE IMAGES 

·  Timken_TRB_2ROWASSY_TDI_39585D-90015-A

·  Timken_TRB_2ROWASSY_TDI_39585D-90015-A3

·  Timken_TRB_2ROWASSY_TDI_39585D-90015-T2



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances

Tools and Guides for Engineers

TRB TDI Line Drawing
(JPG, 14KB)