Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    Tapered Roller Bearings - TDI (Tapered Double Inner) Imperial
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TDI (Tapered Double Inner) > Tapered Roller Bearings - TDI (Tapered Double Inner) Imperial > Part Number EE217063D - 217112  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number EE217063D - 217112, Tapered Roller Bearings - TDI (Tapered Double Inner) Imperial


TDI bearings have a one-piece double inner race and two single outer races and are typically supplied complete with an outer race spacer as a pre-set assembly. The bearing can be used at fixed positions on rotation shaft applications. For rotating housing application it can be used to float on the stationary shaft.



Unit of Measure: Imperial Metric Both

Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors  · Spacer

Specifications

Series
217000

Cone Part Number
EE217063D

Cup Part Number
217112

Design Unit
Inch

Cage Material
Stamped Steel


Dimensions

d - Bore
6.25 in
158.750 mm

D - Cup Outer Diameter
11.25 in
285.750 mm

B - Double Cone Width
4.9375 in
125.413 mm

C - Cup Width
2.1875 in
55.563 mm

T - Bearing Width across Cups
5.0625 in
128.588 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.13 in
3.300 mm

r - Cup Backface "To Clear" Radius2
0.250 in
6.35 mm

da - Cone Frontface Backing Diameter
7.09 in
180.1 mm

Db - Cup Backface Backing Diameter
9.88 in
250.95 mm

Ab - Cage-Cone Frontface Clearance
0.05 in
1.3 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.


Basic Load Ratings

C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)1
41700 lbf
185000 N

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)2
280000 lbf
1240000 N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)3
72500 lbf
323000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)4
28700 lbf
128000 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.45

e - ISO Factor2
0.4

Y1 - ISO Factor3
1.68

Y2 - ISO Factor4
2.5

Cg - Geometry Factor5
0.114
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
5 Geometry constant for Lubrication Life Adjustment Factor a3l.


Spacer

Note
Spacer shows standard nominal .01 radii, actual bearing may vary


 MORE IMAGES 

·  Timken_TRB_2ROWASSY_TDI_39585D-90015-A

·  Timken_TRB_2ROWASSY_TDI_39585D-90015-A3

·  Timken_TRB_2ROWASSY_TDI_39585D-90015-T2



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances

Tools and Guides for Engineers

TRB TDI Line Drawing
(JPG, 14KB)


Add To Cart Request Quote
<