All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TS (Tapered Single) > Tapered Roller Bearings - TS (Tapered Single) Imperial > Part Number A5069 - A5144  

Part Number A5069 - A5144, Tapered Roller Bearings - TS (Tapered Single) Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
A5000

Cone Part Number
A5069

Cup Part Number
A5144

Design Unit
Inch

Cage Material
Stamped Steel


Dimensions

d - Bore
0.6872 in
17.455 mm

D - Cup Outer Diameter
1.4380 in
36.525 mm

B - Cone Width
0.4375 in
11.113 mm

C - Cup Width
0.3125 in
7.938 mm

T - Bearing Width
0.4375 in
11.113 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.06 in
1.520 mm

r - Cup Backface "To Clear" Radius2
0.06 in
1.52 mm

da - Cone Frontface Backing Diameter
0.84 in
21.5 mm

db - Cone Backface Backing Diameter
0.93 in
23.5 mm

Da - Cup Frontface Backing Diameter
1.34 in
34.00 mm

Db - Cup Backface Backing Diameter
1.18 in
29.97 mm

Ab - Cage-Cone Frontface Clearance
0.08 in
2 mm

Aa - Cage-Cone Backface Clearance
-0.02 in
-0.5 mm

a - Effective Center Location3
-0.08 in
-2 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
760 lbf
3380 N

C1 - Dynamic Radial Rating (1 million revolutions)2
2930 lbf
13000 N

C0 - Static Radial Rating
2600 lbf
11600 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
634 lbf
2820 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.2

e - ISO Factor2
0.49

Y - ISO Factor3
1.23

G1 - Heat Generation Factor (Roller-Raceway)
2.5

G2 - Heat Generation Factor (Rib-Roller End)
4.6

Cg - Geometry Factor4
0.0376
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances



 NEW PRODUCT OFFERING 


HPTO34S1-M-Angle-R
PT Tech