Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
Activated later
Unit of Measure

Key Dimensions

UPC

 N/A 0013992404572

Cone Part Number

 N/A GH916642

Cup Part Number

 N/A GH916610

Bore (d)

 N/A 2.7554 in69.987 mm

O.D. (D)

 N/A 6.9375 in176.213 mm

Width (T)

 N/A 2.1563 in54.770 mm
Dynamic Radial Load Rating - 1M Revs (C1)1 N/A 82200 lbf366000 N
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 21300 lbf94800 N
e Factor3 N/A 0.7
K Factor4 N/A 0.84
Y Factor 5 N/A 0.86

Other Dimensions

Weight

 N/A 13.90 lb6.30 Kg

Inner Ring Width (B)

 N/A 2.0938 in53.183 mm

Outer Ring Width (C)

 N/A 1.4375 in36.513 mm
Effective Center Location6 N/A -0.08 in-2 mm
Max Shaft Fillet Radius7 N/A 0.13 in3.300 mm
Max Housing Fillet Radius8 N/A 0.130 in3.30 mm

Shaft Backing Shoulder Dia. - Frontface (da)

 N/A 3.74 in95 mm

Shaft Backing Shoulder Dia. - Backface (db)

 N/A 4.06 in103 mm

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 6.48 in164.10 mm

Housing Backing Shoulder Dia. - Backface (Db)

 N/A 5.79 in147.07 mm

Cage Location rel. to BF (Aa)

 N/A 0.31 in7.9 mm

Cage Location rel. to FF (Ab)

 N/A 0.16 in4.1 mm

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)9 N/A 25500 lbf114000 N

Static Radial Load Rating (C0)

 N/A 96900 lbf431000 N

Factors

G1 Factor

 N/A 133

G2 Factor

 N/A 18.7
Geometry Factor (Cg)10 N/A 0.107
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Negative value indicates effective center inside cone backface.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 These maximum fillet radii will be cleared by the bearing corners.
  • 9 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.