Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    Tapered Roller Bearings - TS (Tapered Single) Imperial
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TS (Tapered Single) > Tapered Roller Bearings - TS (Tapered Single) Imperial > Part Number HM227545 - HM227515  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number HM227545 - HM227515, Tapered Roller Bearings - TS (Tapered Single) Imperial


This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.



Unit of Measure: Imperial Metric Both

Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
HM227500

Cone Part Number
HM227545

Cup Part Number
HM227515

Design Unit
Inch

Cage Material
Stamped Steel


Dimensions

d - Bore
5.1168 in
129.967 mm

D - Cup Outer Diameter
8.5000 in
215.900 mm

B - Cone Width
2.375 in
60.325 mm

C - Cup Width
1.7500 in
44.450 mm

T - Bearing Width
2.2500 in
57.150 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.13 in
3.300 mm

r - Cup Backface "To Clear" Radius2
0.130 in
3.30 mm

da - Cone Frontface Backing Diameter
5.63 in
143 mm

db - Cone Backface Backing Diameter
5.79 in
147 mm

Da - Cup Frontface Backing Diameter
7.99 in
202.95 mm

Db - Cup Backface Backing Diameter
7.72 in
196.09 mm

Ab - Cage-Cone Frontface Clearance
0.04 in
1 mm

Aa - Cage-Cone Backface Clearance
0.15 in
3.8 mm

a - Effective Center Location3
-0.54 in
-13.7 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
26700 lbf
119000 N

C1 - Dynamic Radial Rating (1 million revolutions)2
103000 lbf
458000 N

C0 - Static Radial Rating
164000 lbf
727000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
14600 lbf
64800 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.83

e - ISO Factor2
0.32

Y - ISO Factor3
1.88

G1 - Heat Generation Factor (Roller-Raceway)
397.7

G2 - Heat Generation Factor (Rib-Roller End)
51.7

Cg - Geometry Factor4
0.120
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances


Add To Cart Request Quote
<