Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
Activated later
Unit of Measure

Key Dimensions

UPC

 N/A 0053893152738

Cone Part Number

 N/A GL435049

Cup Part Number

 N/A GL435010

Bore (d)

 N/A 6.7500 in171.450 mm

O.D. (D)

 N/A 8.7500 in222.250 mm

Width (T)

 N/A 1.0000 in25.400 mm
Dynamic Radial Load Rating - 1M Revs (C1)1 N/A 37500 lbf167000 N
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 9720 lbf43200 N
e Factor3 N/A 0.38
K Factor4 N/A 1.55
Y Factor 5 N/A 1.6

Other Dimensions

Weight

 N/A 5.10 lb2.30 Kg

Inner Ring Width (B)

 N/A 0.9688 in24.608 mm

Outer Ring Width (C)

 N/A 0.75 in19.050 mm
Effective Center Location6 N/A 0.42 in10.7 mm
Max Shaft Fillet Radius7 N/A 0.060 in1.520 mm
Max Housing Fillet Radius8 N/A 0.06 in1.52 mm

Shaft Backing Shoulder Dia. - Frontface (da)

 N/A 7.05 in179 mm

Shaft Backing Shoulder Dia. - Backface (db)

 N/A 7.13 in181 mm

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 8.50 in215.90 mm

Housing Backing Shoulder Dia. - Backface (Db)

 N/A 8.31 in211.07 mm

Cage Location rel. to BF (Aa)

 N/A 0 in0 mm

Cage Location rel. to FF (Ab)

 N/A 0.08 in2 mm

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)9 N/A 6250 lbf27800 N

Static Radial Load Rating (C0)

 N/A 69800 lbf311000 N

Factors

G1 Factor

 N/A 361.8

G2 Factor

 N/A 179.2
Geometry Factor (Cg)10 N/A 0.176
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Negative value indicates effective center inside cone backface.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 These maximum fillet radii will be cleared by the bearing corners.
  • 9 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.