Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
Activated later
Unit of Measure

Key Dimensions

UPC

 N/A 0013992328137

Cone Part Number

 N/A GL630349C

Cup Part Number

 N/A GL630310

Bore (d)

 N/A 6.0000 in152.400 mm

O.D. (D)

 N/A 7.5625 in192.088 mm

Width (T)

 N/A 0.9843 in25.001 mm
Dynamic Radial Load Rating - 1M Revs (C1)1 N/A 32000 lbf
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 8310 lbf
e Factor3 N/A 0.42
K Factor4 N/A 1.4
Y Factor 5 N/A 1.44

Other Dimensions

Weight

 N/A 3.4 lb1.60 Kg

Inner Ring Width (B)

 N/A 0.9449 in24.000 mm

Outer Ring Width (C)

 N/A 0.7480 in18.999 mm
Effective Center Location6 N/A 0.4 in10.2 mm
Max Shaft Fillet Radius7 N/A 0.080 in2.0 mm
Max Housing Fillet Radius8 N/A 0.08 in2 mm

Shaft Backing Shoulder Dia. - Frontface (da)

 N/A 6.22 in158 mm

Shaft Backing Shoulder Dia. - Backface (db)

 N/A 6.38 in162 mm

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 7.40 in187.96 mm

Housing Backing Shoulder Dia. - Backface (Db)

 N/A 7.20 in182.88 mm

Cage Location rel. to BF (Aa)

 N/A 0.06 in1.5 mm

Cage Location rel. to FF (Ab)

 N/A 0.13 in3.3 mm

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)9 N/A 5920 lbf

Static Radial Load Rating (C0)

 N/A 62200 lbf

Factors

G1 Factor

 N/A 293

G2 Factor

 N/A 164
Geometry Factor (Cg)10 N/A 0.17
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Negative value indicates effective center inside cone backface.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 These maximum fillet radii will be cleared by the bearing corners.
  • 9 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.