Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    Tapered Roller Bearings - TS (Tapered Single) Imperial
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TS (Tapered Single) > Tapered Roller Bearings - TS (Tapered Single) Imperial > Part Number LL580049 - LL580010  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number LL580049 - LL580010, Tapered Roller Bearings - TS (Tapered Single) Imperial


This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.



Unit of Measure: Imperial Metric Both

Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
LL580000

Cone Part Number
LL580049

Cup Part Number
LL580010

Design Unit
Inch

Cage Material
Stamped Steel

Related Assembly Number(s)
LL580049-90011
LL580049-90016


Dimensions

d - Bore
24.2500 in
615.950 mm

D - Cup Outer Diameter
27.8750 in
708.025 mm

B - Cone Width
1.625 in
41.275 mm

C - Cup Width
1.1562 in
29.367 mm

T - Bearing Width
1.6250 in
41.275 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.14 in
3.560 mm

r - Cup Backface "To Clear" Radius2
0.130 in
3.30 mm

da - Cone Frontface Backing Diameter
24.8 in
630 mm

db - Cone Backface Backing Diameter
24.92 in
633 mm

Da - Cup Frontface Backing Diameter
27.19 in
690.63 mm

Db - Cup Backface Backing Diameter
27.05 in
687.07 mm

Ab - Cage-Cone Frontface Clearance
0.19 in
4.8 mm

Aa - Cage-Cone Backface Clearance
0.06 in
1.5 mm

a - Effective Center Location3
2.43 in
61.7 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
35200 lbf
157000 N

C1 - Dynamic Radial Rating (1 million revolutions)2
136000 lbf
605000 N

C0 - Static Radial Rating
414000 lbf
1840000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
23400 lbf
104000 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.51

e - ISO Factor2
0.39

Y - ISO Factor3
1.55

G1 - Heat Generation Factor (Roller-Raceway)
6270

G2 - Heat Generation Factor (Rib-Roller End)
2020

Cg - Geometry Factor4
0.242
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances


Add To Cart Request Quote
<