Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    Tapered Roller Bearings - TS (Tapered Single) Imperial
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TS (Tapered Single) > Tapered Roller Bearings - TS (Tapered Single) Imperial > Part Number LL777148 - LL777110  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number LL777148 - LL777110, Tapered Roller Bearings - TS (Tapered Single) Imperial


This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.



Unit of Measure: Imperial Metric Both

Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
LL777100

Cone Part Number
LL777148

Cup Part Number
LL777110

Design Unit
Inch

Cage Material
Stamped Steel


Dimensions

d - Bore
22.5000 in
571.500 mm

D - Cup Outer Diameter
26.0 in
660.400 mm

B - Cone Width
1.75 in
44.45 mm

C - Cup Width
1.2813 in
32.545 mm

T - Bearing Width
1.8125 in
46.038 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.13 in
3.300 mm

r - Cup Backface "To Clear" Radius2
0.130 in
3.30 mm

da - Cone Frontface Backing Diameter
23.03 in
585 mm

db - Cone Backface Backing Diameter
23.15 in
588 mm

Da - Cup Frontface Backing Diameter
26.09 in
662.69 mm

Db - Cup Backface Backing Diameter
25.28 in
642.11 mm

Ab - Cage-Cone Frontface Clearance
0.21 in
5.3 mm

Aa - Cage-Cone Backface Clearance
0.16 in
4.1 mm

a - Effective Center Location3
2.68 in
68.1 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
39700 lbf
176000 N

C1 - Dynamic Radial Rating (1 million revolutions)2
153000 lbf
680000 N

C0 - Static Radial Rating
431000 lbf
1920000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
31100 lbf
138000 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.27

e - ISO Factor2
0.46

Y - ISO Factor3
1.31

G1 - Heat Generation Factor (Roller-Raceway)
5033.8

G2 - Heat Generation Factor (Rib-Roller End)
1474.6

Cg - Geometry Factor4
0.239
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances


Add To Cart Request Quote
<