All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TS (Tapered Single) > Tapered Roller Bearings - TS (Tapered Single) Imperial > Part Number LM12749 - LM12710P  

Part Number LM12749 - LM12710P, Tapered Roller Bearings - TS (Tapered Single) Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
LM12700

Cone Part Number
LM12749

Cup Part Number
LM12710P

Design Unit
Inch

Cage Material
Stamped Steel


Dimensions

d - Bore
0.8656 in
21.986 mm

D - Cup Outer Diameter
1.7810 in
45.237 mm

B - Cone Width
0.6550 in
16.637 mm

C - Cup Width
0.4750 in
12.065 mm

T - Bearing Width
0.6101 in
15.497 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.050 in
1.270 mm

r - Cup Backface "To Clear" Radius2
0.050 in
1.27 mm

da - Cone Frontface Backing Diameter
1.02 in
26 mm

db - Cone Backface Backing Diameter
1.08 in
27.5 mm

Da - Cup Frontface Backing Diameter
1.67 in
42.40 mm

Db - Cup Backface Backing Diameter
1.56 in
39.62 mm

Ab - Cage-Cone Frontface Clearance
0.04 in
1 mm

Aa - Cage-Cone Backface Clearance
0.01 in
0.3 mm

a - Effective Center Location3
-0.21 in
-5.3 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
2250 lbf
10000 N

C1 - Dynamic Radial Rating (1 million revolutions)2
8680 lbf
38600 N

C0 - Static Radial Rating
7930 lbf
35300 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
1180 lbf
5250 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.91

e - ISO Factor2
0.31

Y - ISO Factor3
1.96

G1 - Heat Generation Factor (Roller-Raceway)
8.2

G2 - Heat Generation Factor (Rib-Roller End)
6.98

Cg - Geometry Factor4
0.048
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances



 NEW PRODUCT OFFERING 


HPTO34S1-M-Angle-R
PT Tech