Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    Tapered Roller Bearings - TS (Tapered Single) Imperial
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TS (Tapered Single) > Tapered Roller Bearings - TS (Tapered Single) Imperial > Part Number M252349 - M252310X  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number M252349 - M252310X, Tapered Roller Bearings - TS (Tapered Single) Imperial


This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.



Unit of Measure: Imperial Metric Both

Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
M252300

Cone Part Number
M252349

Cup Part Number
M252310X

Design Unit
Inch

Cage Material
Stamped Steel


Dimensions

d - Bore
10.6250 in
269.875 mm

D - Cup Outer Diameter
15.0000 in
381.000 mm

B - Cone Width
2.9375 in
74.613 mm

C - Cup Width
2.2500 in
57.150 mm

T - Bearing Width
2.9374 in
74.610 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.25 in
6.4 mm

r - Cup Backface "To Clear" Radius2
0.130 in
3.30 mm

da - Cone Frontface Backing Diameter
11.3 in
287 mm

db - Cone Backface Backing Diameter
11.65 in
296 mm

Da - Cup Frontface Backing Diameter
14.33 in
364.00 mm

Db - Cup Backface Backing Diameter
14.02 in
356.11 mm

Ab - Cage-Cone Frontface Clearance
0.19 in
4.8 mm

Aa - Cage-Cone Backface Clearance
0.3 in
7.6 mm

a - Effective Center Location3
-0.26 in
-6.6 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
67000 lbf
298000 N

C1 - Dynamic Radial Rating (1 million revolutions)2
258000 lbf
1150000 N

C0 - Static Radial Rating
455000 lbf
2030000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
38100 lbf
170000 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.76

e - ISO Factor2
0.33

Y - ISO Factor3
1.8

G1 - Heat Generation Factor (Roller-Raceway)
1839.2

G2 - Heat Generation Factor (Rib-Roller End)
226.1

Cg - Geometry Factor4
0.159
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances



 NEW PRODUCT OFFERING 


TimkenWirelessSensor
Timken® Wireless Sensor and Monitoring Solution

timken-2TS-DM-24-OD-pin-cage-top-angle-view
Tapered Roller Bearings - 2TS (Matched Bearing Assembly)

Add To Cart Request Quote
<