All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TS (Tapered Single) > Tapered Roller Bearings - TS (Tapered Single) Imperial > Part Number M84249 - M84210  

Part Number M84249 - M84210, Tapered Roller Bearings - TS (Tapered Single) Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
M84200

Cone Part Number
M84249

Cup Part Number
M84210

Design Unit
Inch

Cage Material
Stamped Steel

Related Assembly Number(s)
M84249-902A1


Dimensions

d - Bore
1 in
25.40 mm

D - Cup Outer Diameter
2.3437 in
59.530 mm

B - Cone Width
0.9100 in
23.114 mm

C - Cup Width
0.7200 in
18.288 mm

T - Bearing Width
0.9200 in
23.368 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.03 in
0.760 mm

r - Cup Backface "To Clear" Radius2
0.06 in
1.52 mm

da - Cone Frontface Backing Diameter
1.27 in
32.5 mm

db - Cone Backface Backing Diameter
1.42 in
36 mm

Da - Cup Frontface Backing Diameter
2.24 in
55.90 mm

Db - Cup Backface Backing Diameter
1.95 in
49.53 mm

Ab - Cage-Cone Frontface Clearance
0.09 in
2.3 mm

Aa - Cage-Cone Backface Clearance
0.03 in
0.8 mm

a - Effective Center Location3
-0.2 in
-5.1 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
3390 lbf
15100 N

C1 - Dynamic Radial Rating (1 million revolutions)2
13100 lbf
58100 N

C0 - Static Radial Rating
14200 lbf
63300 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
3170 lbf
14100 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.07

e - ISO Factor2
0.55

Y - ISO Factor3
1.1

G1 - Heat Generation Factor (Roller-Raceway)
12.7

G2 - Heat Generation Factor (Rib-Roller End)
7.56

Cg - Geometry Factor4
0.067
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances



 NEW PRODUCT OFFERING 


HPTO34S1-M-Angle-R
PT Tech