All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TNA (Tapered Double, non-adjustable) Imperial > Part Number NA537075 - 537103D  

Part Number NA537075 - 537103D, Tapered Roller Bearings - TNA (Tapered Double, non-adjustable) Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  






Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Cone Part Number
NA537075

Cup Part Number
537103D

Design Unit
Inch


Dimensions

d - Bore
7.5 in
190.5 mm

D - Cup Outer Diameter
10-1/4 in
260.350 mm

T - Bearing Width across Cones
2.625 in
66.675 mm

C - Double Cup Width
2.0000 in
50.800 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.14 in
3.5 mm

r - Cup Backface "To Clear" Radius2
0.030 in
0.8 mm

db - Cone Backface Backing Diameter
8.11 in
206 mm

Da - Cup Frontface Backing Diameter
9.72 in
246.90 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
13700 lbf
61000 N

C1 - Dynamic Radial Rating (1 million revolutions)2
92100 lbf
410000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
8040 lbf
35800 N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)4
23900 lbf
106000 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.70

e - ISO Factor2
0.34

Y1 - ISO Factor3
1.97

Y2 - ISO Factor4
2.93
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.


 MORE IMAGES 

·  timken-TNA-cutaway-angle-view

·  timken-TNA-left-angle-view

·  Timken TRB TNA



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances

Tools and Guides for Engineers