All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TNA (Tapered Double, non-adjustable) Imperial > Part Number NA643 - 632D  

Part Number NA643 - 632D, Tapered Roller Bearings - TNA (Tapered Double, non-adjustable) Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  






Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Cone Part Number
NA643

Cup Part Number
632D

Related Assembly Number(s)
NA643-90032

Design Unit
Inch


Dimensions

d - Bore
2 3/4 in
69.850 mm

D - Cup Outer Diameter
5.3750 in
136.525 mm

T - Bearing Width across Cones
3.75 in
95.25 mm

C - Double Cup Width
3 in
76.2 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.14 in
3.5 mm

r - Cup Backface "To Clear" Radius2
0.06 in
1.5 mm

db - Cone Backface Backing Diameter
3.39 in
86 mm

Da - Cup Frontface Backing Diameter
4.96 in
125.98 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
13600 lbf
60400 N

C1 - Dynamic Radial Rating (1 million revolutions)2
91200 lbf
406000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
8420 lbf
37400 N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)4
23600 lbf
10500 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.61

e - ISO Factor2
0.36

Y1 - ISO Factor3
1.86

Y2 - ISO Factor4
2.78
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.


 MORE IMAGES 

·  timken-TNA-cutaway-angle-view

·  timken-TNA-left-angle-view

·  Timken TRB TNA



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances

Tools and Guides for Engineers