All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TNA (Tapered Double, non-adjustable) Imperial > Part Number NA94650 - 94118D  

Part Number NA94650 - 94118D, Tapered Roller Bearings - TNA (Tapered Double, non-adjustable) Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  






Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Cone Part Number
NA94650

Cup Part Number
94118D

Design Unit
Inch


Dimensions

d - Bore
6 1/2 in
165.1 mm

D - Cup Outer Diameter
11.7500 in
298.450 mm

T - Bearing Width across Cones
5.625 in
142.875 mm

C - Double Cup Width
4.375 in
111.125 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.14 in
3.5 mm

r - Cup Backface "To Clear" Radius2
0.06 in
1.5 mm

db - Cone Backface Backing Diameter
7.48 in
190.0 mm

Da - Cup Frontface Backing Diameter
10.75 in
272.03 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
38500 lbf
171000 N

C1 - Dynamic Radial Rating (1 million revolutions)2
258000 lbf
1150000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
30800 lbf
137000 N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)4
67000 lbf
298000 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.25

e - ISO Factor2
0.47

Y1 - ISO Factor3
1.44

Y2 - ISO Factor4
2.15
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.


 MORE IMAGES 

·  timken-TNA-cutaway-angle-view

·  timken-TNA-left-angle-view

·  Timken TRB TNA



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances

Tools and Guides for Engineers