Part Number SUCAFL205-14-IP69K/F, Corrosion-Resistant Two-Bolt Flanged Mounted Bearings

Search Catalog



	All Product Types Corrosion-Resistant Two-Bolt Flanged Mounted Bearings - Set Screw Locking (IP69K)

		\| Shipping \| Tax \| Terms
Shopping Cart	0 Items

Request for Quote	0 Items

All Product Types > ENGINEERED BEARINGS > Mounted Bearings > Timken® IP69K Hygienic Mounted Ball Bearings > Corrosion-Resistant Two-Bolt Flanged Mounted Bearings - Set Screw Locking (IP69K) > Part Number SUCAFL205-14-IP69K/F


	Part Number SUCAFL205-14-IP69K/F, Corrosion-Resistant Two-Bolt Flanged Mounted Bearings - Set Screw Locking

● UCFL two-bolt flanged units are suggested for industrial applications where normal loads are encountered.
● This series is primarily designed for applications where the mounting area is restricted.
● Each unit comes assembled and ready for mounting, using bolts through the flange.
● These units use wide inner ring ball bearings with self-aligning spherical outside diameters that compensate for shaft misalignment.
● Timken UCFL series Mounted Bearings feature the Timken set screw locking (UC) bearing insert.
● Bearing prelubricated and ready for immediate installation.
● Grease fitting supplied for relubrication.
● The bonded seal design is well-suited for applications involving wet or dirty environments.
● Bolt-hole spacing dimensions and shaft center location are interchangeable with competitive units.

timken-flange-mounted-ball-bearing-unit-machined-stainless-2-bolt-AFL206-NLH-SUC206-insert-IP69K-F-seal-angle

larger image

larger image

Unit of Measure: Imperial Metric Both

Specifications · Dimensions · Basic Load Ratings

Specifications

Bore Size		0.8750 in

Seal Type		IP69K Seal

Housing Material		Machined Stainless Steel

Bearing Number		SUC205-14-IP69K/F

Lubrication Type		Standard Food Safe Grease

Locking Style		Set Screw Locking

Housing Construction		Two-Bolt Flange

Dimensions

Total Length H		4.890 in 124.2 mm

Total Height L		2.661 in 67.6 mm

Total Width A0		1.414 in 35.9 mm

Bolt Hole Spacing J		3.890 in 98.8 mm

Housing Width A		0.969 in 24.6 mm

Bolt Hole Size N		0.469 in 11.9 mm

Center of Bearing from Housing End A2		0.634 in 16.1 mm

Center of Bearing from Bearing End S		0.563 in 14.3 mm

Inner Ring Width B		1.343 in 34.1 mm

Basic Load Ratings

Dynamic Load Rating		2676 lbf 11900 N

Static Load Rating		1417 lbf 6300 N

MORE IMAGES


	· Corrosion TwoBolt-Family Picture Ball Bearing

	· timken-flange-mounted-ball-bearing-unit-machined-stainless-2-bolt-AFL206-NLH-SUC206-insert-IP69K-F-seal-front