Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
  • Body - PH 13-8 Mo stainless steel per AMS 5629 - heat treated.
  • Ball - 440C stainless steel per AMS 5630 - heat treated.
  • Optional Ball - 13-8 Mo stainless steel per AMS 5629 - heat treated. (Specify by adding suffix "C" ex.: ATW-3ETC)
  • Race - 17-4 PH stainless steel per AMS 5643 - heat treated.
  • PTFE Liner - (AT 3200) Permanently bonded to race inside diameter, qualified to SAE-AS81820 Type A.
  • Temperature range: -65°F to +325°F.
  • No load rotational breakaway torque can be varied to meet specific application requirements.
  • Keyslots are available. Units are supplied without keyslots. When a keylsot is required, specify by adding suffix "K". Ex.: ATWK-3T.
  • As applicable, keyslots will conform to SAE-AS81935/3 or NAS 559.
  • Rod End Bearings listed are manufactured to conform to the dimensions, materials, and configurations of SAE-AS81935/9, and are approved for procurement under this specification.
Unit of Measure

Specifications

Part Number

 N/A ATG-6ET

SAE Part Number

N/A M81935/9-06L

Thread Type

 N/A Left Hand

Thread Configuration

 N/A Female

B - Ball Bore

 N/A .3750 in

W - Ball Width

 N/A .406 in

H - Head Width

 N/A .322 in

A - Base to Center

 N/A 1.908 in

D - Head Diameter

 N/A 1.131 in

O - Ball Shoulder Diameter

 N/A .475 in

S - Max. Housing I.D.

 N/A .8125 in

E - Diameter

 N/A .501 in

K - Boss Diameter

 N/A .720 in

J - Wrench Flat Width

N/A .625 in

F - Boss Height

 N/A .250 in

Ball Diameter

 N/A .625 in

P - Drilled Hole Depth

 N/A 1.125 in

C - Thread Depth [inch]

 N/A 1.000 in

Thread Size

 N/A 3/8-24

Thread Class

 N/A UNJF-3B-LH

a - Misalignment Angle

 N/A 9 º

Approximate Brg. Weight

N/A .145 lb

Ultimate Radial Static Load Capacity

 N/A 13,400 lb

Fatique Load

 N/A 3,100 lb

Axial Proof Load

 N/A 1,100 lb

No Load Rotational Breakaway Torque

 N/A 1 to 15 in·lb

Note

 N/A For dimensional tolerances of listed features, see the PDF version of the catalog under the "View Product Catalogs" tab from the home page.