Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information

Effective August 21st, 2023, the Naval Air Warfare Center Aircraft Division (NAWCAD) has disapproved Timken Aurora’s qualification status for SAE-AS81820 and SAE-AS81935 specifications. Timken Aurora is working diligently to get requalified.

  • Body - PH 13-8 Mo stainless steel per AMS 5629 - heat treated.
  • Ball - 440C stainless steel per AMS 5630 - heat treated.
  • Optional Ball - 13-8 Mo stainless steel per AMS 5629 - heat treated. (Specify by adding suffix "C" ex.: ATW-3ETC)
  • Race - 17-4 PH stainless steel per AMS 5643 - heat treated.
  • PTFE Liner - (AT 3200) Permanently bonded to race inside diameter, qualified to SAE-AS81820 Type A.
  • Temperature range: -65°F to +325°F.
  • No load rotational breakaway torque can be varied to meet specific application requirements.
  • Keyslots are available. Units are supplied without keyslots. When a keylsot is required, specify by adding suffix "K". Ex.: ATWK-3T.
  • As applicable, keyslots will conform to SAE-AS81935/3 or NAS 559.
  • Rod End Bearings listed are manufactured to conform to the dimensions, materials, and configurations of SAE-AS81935/9, and are approved for procurement under this specification.
Unit of Measure

Key Dimensions

Part Number

 N/A ATW-10ET

SAE Part Number

N/A M81935/9-10

Thread Type

 N/A Right Hand

Thread Configuration

 N/A Female

B - Ball Bore

 N/A .6250 in

W - Ball Width

 N/A .625 in

H - Head Width

 N/A .510 in

A - Base to Center

 N/A 2.707 in

D - Head Diameter

 N/A 1.763 in

O - Ball Shoulder Diameter

 N/A .739 in

S - Max. Housing I.D.

 N/A 1.1875 in

E - Diameter

 N/A .845 in

K - Boss Diameter

 N/A 1.020 in

J - Wrench Flat Width

N/A .875 in

F - Boss Height

 N/A .375 in

Ball Diameter

 N/A .968 in

P - Drilled Hole Depth

 N/A 1.500 in

C - Thread Depth [inch]

 N/A 1.375 in

Thread Size

 N/A 5/8-18

Thread Class

 N/A UNJF-3B

a - Misalignment Angle

 N/A 8 º

Approximate Brg. Weight

N/A .55 lb

Ultimate Radial Static Load Capacity

 N/A 39,500 lb

Fatique Load

 N/A 9,200 lb

Axial Proof Load

 N/A 2,430 lb

No Load Rotational Breakaway Torque

 N/A 1 to 15 in·lb

Note

 N/A For dimensional tolerances of listed features, see the PDF version of the catalog under the "View Product Catalogs" tab from the home page.