The ADB (Aluminum Double Beam) Series coupling enhances the beam coupling options available from Lovejoy Inc. The longer overall length allows the ADB series to span longer BSE (between shaft end) measurements.

    The aluminum material used in its construction keeps the coupling’s weight low. The ADB design offers two flex points allowing for greater angular misalignment, up to 7°. This design also allows for up to .024 inches of parallel misalignment. The torque capacity ADB series is more than double the range of the single beam designs, with the largest size having a torque capacity of 88 in-lbs.
Unit of Measure

Specifications

Description 

N/A ADB5-BEAM CP-1/2X1/2

Coupling Size

N/A ADB5

Type

N/A Double Beam Coupling

Material

N/A Aluminum

Style

N/A Clamp Screw

Finish

N/A Anodized Aluminum

Weight

N/A 0.08 oz

Weight (Complete Coupling w/ Min. Bores)

N/A 1.60 oz

Dimensional Data

Bore A

N/A 0.500 in

Bore B

N/A 0.500 in

Overall Length

N/A 1.500 in38.10 mm

Keyway Size

N/A No Keyway

Outside Diameter

N/A 1.000 in25.40 mm

Min. Bore (Dimensions ID1/ID2)

N/A 0.295 in7.50 mm

Max. Bore (Dimensions ID1/ID2)

N/A 0.500 in12.70 mm

Length thru Bore

N/A 0.433 in11.00 mm

Clamp Screw Size

N/A M3

Cubic inches

N/A 1.50000 in³

Performance Data

Max. Operating Temperature

N/A 200.00 ºF

Max. Speed

N/A 10000 rpm

Nominal Torque

N/A 20.00 in·lb

Max. Angular Misalignment

N/A 7.00 º

Axial Misalignment

N/A ± 0.010 in

Parallel Misalignment

N/A 0.015 in

Moment of Inertia

N/A 0.0130 lb·in²

Torsional Stiffness

N/A 6266.00 in·lb/rad

Features

Features 

N/A
  • Zero backlash design
  • Simple one piece assembly
  • Aluminum material
  • Largest amount of angular misalignment capacity

Notes

Notes 

N/A
  • Nominal torque, torsional stiffness, weight and moment of inertia are based on minimum bore size.