COMPANY HEADER
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
Unit of Measure

Specifications

Shaft Size

 N/A 115 mm

Shaft Size Type

 N/A Metric

Housing Type

 N/A Cartridge

Dimensions

Dimension B 

 N/A 5-5/8 in142.9 mm
Dimension S1 N/A 3 3/8 mm85.7 in

Dimension R

 N/A 2 1/4 in57.2 mm

Dimension A 

 N/A 4-5/8 in117.5 mm

Dimension d1 

 N/A 6-47/64 in171.1 mm

Dimension C

 N/A 1 5/8 in41.3 mm

Dimension E

 N/A 7 9/16 in192.1 mm

Dimension K

 N/A 8 in203.2 mm

Dimension M

 N/A 4 13/32 in111.9 mm

Dimension H 

 N/A 23/32 in18.3 mm

Radial and Thrust Factors; Speed and Slip-Fit Load Limits

e

 N/A 0.53

X (if Fa/Fr ≤ e)

 N/A 0.87

Y (if Fa/Fr ≤ e)

 N/A 1.63

X (if Fa/Fr > e)

 N/A 0.7

Y (if Fa/Fr > e)

 N/A 1.97

K Factor

 N/A 1.13
C90 Dynamic Load Rating2 N/A 33000 lbf

C0 Static Load Rating

 N/A 188400 lbf
Fa-max Maximum Permissible Thrust Load3 N/A 6908 lbf
Fr-max Maximum Allowable Slip Fit Radial Load4 N/A 27000 lbf
Max. Speed5 N/A 1360 rpm
  • 1 Permissible axial displacement from normal position of one bearing ring in relation to the other.
  • 2 C90 is the Dynamic Load Rating based on a rated Life of 90 million revolutions (3000 hrs at 500 RPM).
  • 3 Fa-max is based on the limits of the holding force of two properly tightened collars and set screws. Fifty percent of the values should be used when a single collar is installed.
  • 4 If the application loads approach or exceed Fr-max, the shaft fit should be adjusted to a line-to-line (g6 or h6) or light press fit (m6).
  • 5 Timken Double Lip Seal