Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
Unit of Measure

Key Dimensions

UPC

 N/A 0085706051778

Shaft Size

 N/A 1 1/4 in

Shaft Size Type

 N/A Imperial

Housing Type

 N/A Cartridge

Other Dimensions

Dimension B 

 N/A 2-3/4 in69.9 mm

Dimension A 

 N/A 1-7/8 in47.6 mm

Dimension d1 

 N/A 2 5/62 in54.8 mm

Dimension C

 N/A 9/16 in14.3 mm

Dimension E

 N/A 2 1/2 in63.5 mm

Dimension K

 N/A 2.637 in66.98 mm

Dimension M

 N/A 1 13/16 in46 mm

Dimension H 

 N/A 21/32 in16.7 mm

Radial and Thrust Factors; Speed and Slip-Fit Load Limits

e

 N/A 0.49

X (if Fa/Fr ≤ e)

 N/A 0.87

Y (if Fa/Fr ≤ e)

 N/A 1.77

X (if Fa/Fr > e)

 N/A 0.7

Y (if Fa/Fr > e)

 N/A 2.14

K Factor

 N/A 1.23
C90 Dynamic Load Rating1 N/A 3810 lbf

C0 Static Load Rating

 N/A 15760 lbf
Fa-max Maximum Permissible Thrust Load2 N/A 2000 lbf
Fr-max Maximum Allowable Slip Fit Radial Load3 N/A 3100 lbf
Max. Speed4 N/A 4490 rpm
  • 1 C90 is the Dynamic Load Rating based on a rated Life of 90 million revolutions (3000 hrs at 500 RPM).
  • 2 Fa-max is based on the limits of the holding force of two properly tightened collars and set screws. Fifty percent of the values should be used when a single collar is installed.
  • 3 If the application loads approach or exceed Fr-max, the shaft fit should be adjusted to a line-to-line (g6 or h6) or light press fit (m6).
  • 4 Timken Double Lip Seal