Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information
RRU Type - Drop-Out Style
    The RRU Type Uniflex coupling is designed for fast, easy installation and removal without disrupting the connected shafts. This is ideal when servicing impellers, bearings and seals. The design consists of two steel hubs fastened with cap screws to a Uniflex double flange coupling (UF Type). The RRU is easily disassembled by simply removing the cap screws and sliding out the UF center spring section.
    This design offers “quick disconnect” for drop out requirements. It can also accommodate a slightly larger shaft diameter than the standard U Type.
    Note: A complete RRU Type coupling is comprised of 2 hubs, 2 hardware kits, and a UF Type center drop out section.
Unit of Measure

Specifications

Description 

 N/A RRU75-HUB-3/8-NKW

Hub Style

 N/A RRU Hub

Coupling Type

 N/A Drop-Out

Material

 N/A Steel

Color

 N/A Gray/Metallic

Bore Type

 N/A Finished Bore

Weight

 N/A 1.68 lb

Dimensional Data

Bore Size 

 N/A 3/8 in

Coupling

 N/A RRU75

Set Screw Thread Size (Dimension T)

 N/A 1/4-20

Keyway Size (W x D)

 N/A No Keyway

Overall Length

 N/A 4.270 in108.46 mm

Min. Bore (Dimensions ID1/ID2)

 N/A 0.375 in9.53 mm

Max. Bore (Dimensions ID1/ID2)

 N/A 1.25 in31.75 mm

Dimension BC

 N/A 2.000 in50.80 mm

Dimension D

 N/A 2.380 in60.45 mm

Dimension FD

 N/A 2.500 in63.50 mm

Dimension FL1

 N/A 0.380 in9.65 mm

Dimension HD

 N/A 2.500 in63.50 mm

Dimension HL

 N/A 1.250 in31.75 mm

Dimension S

 N/A 1.810 in45.97 mm

Pin Location (Dimension SL)

 N/A 0.620 in

Pin Size

 N/A 1/8 in

Cubic inches

 N/A 7.81250 in³

Performance Data

Max. Torque

 N/A 175.00 in·lb

Max. Speed

 N/A 20000.00 rpm

Max. Recommended End Play

 N/A 0.040 in1.02 mm

Max. Parallel Offset

 N/A 0.028 in0.71 mm

Max. Angular Offset

 N/A 4.50 º

Wind-Up Angle at Max. Torque

 N/A 1.82 º

Rated HP at 100 rpm

 N/A 0.28 hp

# of Set Screws Required per Hub

 N/A 1

Max. Torque

 N/A 175 in·lb

Coupling Design

Coupling Design

 N/A Flexible Spring Type Coupling with Exclusive Triple Wound Spring Design
    The Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling.

Notes

Notes 

 N/A
  • OAL Tolerance + .19 inch.
  • Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.