CAD Drawings

• Body - Low carbon steel - protective coated for corrosion resistance.
• Ball - Alloy steel - heat treated - hard chrome plated.
• Race - Low carbon steel - protective coated for corrosion resistance.
• Units are traceable and are magnetic particle inspected after assembly.
• Grease Fitting available for all sizes. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: GMM-3MZ-470 = Zerk Type Fitting GMM-3MF-470 = Flush Type Fitting.
• Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, consult our engineering department.
• For rod end bearings which are non-traceable or non-magnetic particle inspected, consult factory.

• Body - Low carbon steel - protective coated for corrosion resistance.
• Ball - Alloy steel - heat treated - hard chrome plated.
• Race - Low carbon steel - protective coated for corrosion resistance.
• Left-hand threaded units have an identification groove near end of shank.
• Grease Fitting available for all sizes. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: GMW-3MZ-470 = Zerk Type Fitting GMW-3MF-470 = Flush Type Fitting.
• Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, consult our engineering department.
• For rod end bearings which are non-traceable or non-magnetic particle inspected, consult factory.

• Body - 17-4 PH stainless steel - heat treated.
• Ball - 440C stainless steel - heat treated - chrome plated (MFG. option).
• Race - 17-4 PH stainless steel - heat treated.
• Grease fittings are available for all sizes. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: ASM-6Z-10 = Zerk type grease fitting, ASM-6F-10 = Flush type grease fitting.
• Keyways are available. Units are supplied without keyways. When a keyway is required, specify by adding suffix "K". Ex.: ASMK-3-10.
• As applicable, keyways will conform to SAE-AS81935/3 or NAS 559.

• Body - 17-4 PH stainless steel - heat treated.
• Ball - 440C stainless steel - heat treated - chrome plated (MFG. option).
• Race - 17-4 PH stainless steel - heat treated.
• Grease fittings are available for all sizes. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: ASW-6Z-10 = Zerk type grease fitting, ASW-6F-10 = Flush type grease fitting.
• Keyslots are available. Units are supplied without keyslots. When a keyslot is required, specify by adding suffix "K". Ex.: ASWK-3-10.
• As applicable, keyslots will conform to SAE-AS81935/3 or NAS 559.

Standard Configuration:
• Body - 4340 alloy steel - heat treated - cadmium plated.
• Ball - 52100 steel - heat treated - chrome plated.
• Race - 4130 steel - heat treated - cadmium plated.
-1 Configuration:
• Body - 4340 alloy steel - heat treated - cadmium plated.
• Ball - 52100 steel - heat treated - chrome plated.
• Race - 17-4 PH stainless steel - heat treated.
-2 Configuration:
• Body - 4340 alloy steel - heat treated - cadmium plated.
• Ball - 52100 steel - heat treated - chrome plated.
• Race - aluminum bronze - cadmium plated.
-10 Configuration:
• Body - 17-4 PH stainless steel - heat treated.
• Ball - 440 C stainless steel - heat treated.
• Race - 17-4 PH stainless steel - heat treated.
P-10 Configuration:
• Body - 17-4 PH stainless steel - heat treated.
• Ball - 440 C stainless steel - heat treated - chrome plated.
• Race - 17-4 PH stainless steel - heat treated.
• Keyways are available. Units are supplied without keyways. When a keyway is required, specify by adding suffix "K". Ex.: ASXMK-4.
• As applicable, keyways will conform to SAE-AS81935/3 or NAS 559.
• All threads are rolled after heat treatment, and conform to UNJF-3A per AS8879.

Effective August 21st, 2023, the Naval Air Warfare Center Aircraft Division (NAWCAD) has disapproved Timken Aurora’s qualification status for SAE-AS81820 and SAE-AS81935 specifications. Timken Aurora is working diligently to get requalified.

Standard Configuration:
• Body - 4340 alloy steel - heat treated - cadmium plated.
• Ball - 440C stainless steel - heat treated - chrome plated (MFG. option).
• Race - 17-4 PH stainless steel - heat treated.
-10 Configuration:
• Body - 17-4 PH stainless steel - heat treated.
• Ball - 440C stainless steel - heat treated - chrome plated (MFG. option).
• Race - 17-4 PH stainless steel - heat treated.
• PTFE Liner - (AT 3200) Permanently bonded to race inside diameter, qualified to SAE-AS81820 Type A.
• Temperature range: -65°F to +325°F
• Keyways are available. Units are supplied without keyways. When a keyway is required, specify by adding suffix "K". Ex.: ASXMK-4T.
• As applicable, keyways will conform to SAE-AS81935/3 or NAS 559.
• All threads are rolled after heat treatment, and conform to UNJF-3A per AS8879.

Standard Configuration:
• Body - 4340 alloy steel - heat treated - cadmium plated.
• Ball - 52100 steel - heat treated - chrome plated.
• Race - 4130 steel - heat treated - cadmium plated.
-1 Configuration:
• Body - 4340 alloy steel - heat treated - cadmium plated.
• Ball - 52100 steel - heat treated - chrome plated.
• Race - 17-4 PH stainless steel - heat treated.
-2 Configuration:
• Body - 4340 alloy steel - heat treated - cadmium plated.
• Ball - 52100 steel - heat treated - chrome plated.
• Race - aluminum bronze - cadmium plated.
-10 Configuration:
• Body - 17-4 PH stainless steel - heat treated.
• Ball - 440 C stainless steel - heat treated.
• Race - 17-4 PH stainless steel - heat treated.
P-10 Configuration:
• Body - 17-4 PH stainless steel - heat treated.
• Ball - 440 C stainless steel - heat treated - chrome plated.
• Race - 17-4 PH stainless steel - heat treated.
• Keyways are available. Units are supplied without keyways. When a keyway is required, specify by adding suffix "K". Ex.: ASXWK-3.
• As applicable, keyslots will conform to SAE-AS81935/3 or NAS 559.

Effective August 21st, 2023, the Naval Air Warfare Center Aircraft Division (NAWCAD) has disapproved Timken Aurora’s qualification status for SAE-AS81820 and SAE-AS81935 specifications. Timken Aurora is working diligently to get requalified.

Standard Configuration:
• Body - 4340 alloy steel - heat treated - cadmium plated.
• Ball - 440C stainless steel - heat treated - chrome plated (MFG. option).
• Race - 17-4 PH stainless steel - heat treated.
-10 Configuration:
• Body - 17-4 PH stainless steel - heat treated.
• Ball - 440C stainless steel - heat treated - chrome plated (MFG. option).
• Race - 17-4 PH stainless steel - heat treated.
• PTFE Liner - (AT 3200) Permanently bonded to race inside diameter, qualified to SAE-AS81820 Type A.
• Temperature range: -65°F to +325°F
• Keyslots are available. Units are supplied without keyslots. When a keyslot is required, specify by adding suffix "K". Ex.: ASXWK-4T.
• As applicable, keyslots will conform to SAE-AS81935/3 or NAS 559.