CAD (0)
▾
Key Features
- Longer bearing life achieved from higher capacity (vs. competitors)
- Longer lubrication life achieved from lower operating temperatures due to reduced internal friction and running torque from cage guided rollers
- Better contaminant purging from slots on cage face helps extend bearing life
- Greater fatigue strength and increased wear resistance provide tougher protection against shock and acceleration loading from a hardened steel cage
Unit of Measure
Key Dimensions
Design Unit |
N/A Metric |
Bore (d) |
N/A 130 mm |
O.D. (D) |
N/A 9.0551 in230 mm |
Width (B) |
N/A 2.5197 in64 mm |
Dynamic Radial Load Rating - 1M Revs (C1) |
N/A 170000 lbf757000 N |
| e Factor 1 | N/A 0.26 |
Cage Type |
N/A EJ |
Cage Material |
N/A Steel |
Other Dimensions
| Max Shaft Fillet Radius2 | N/A 0.100 in2.5 mm |
Shaft Backing Shoulder Diameter |
N/A 155 mm6.1000 in |
Housing Backing Shoulder Diameter |
N/A 210 mm8.300 in |
- 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 2 Maximum housing fillet radius that bearing corners will clear.
- 3 See thermal speed ratings in the engineering section.
- 4 These factors apply for both inch and metric calculations. See engineering
- 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 7 Geometry constant for Lubrication Life Adjustment Factor a3l.
