CAD (0) ▾
  • Cart is empty
  1. Request CAD files

Key Features

  • Longer bearing life achieved from higher capacity (vs. competitors)
  • Longer lubrication life achieved from lower operating temperatures due to reduced internal friction and running torque from cage guided rollers
  • Better contaminant purging from slots on cage face helps extend bearing life
  • Greater fatigue strength and increased wear resistance provide tougher protection against shock and acceleration loading from a brass cage
Request Information
Unit of Measure

Key Dimensions

Design Unit

 N/A Metric

Bore (d)

 N/A 160 mm

O.D. (D)

 N/A 9.4488 in240 mm

Width (B)

 N/A 2.3622 in60 mm

Dynamic Radial Load Rating - 1M Revs (C1)

 N/A 159000 lbf705000 N
e Factor 1 N/A 0.22

Cage Type

 N/A EM

Cage Material

 N/A Brass

Superseded Part

 N/A 23032EMW33W29

Other Dimensions

Max Shaft Fillet Radius2 N/A 0.080 in2.0 mm

Shaft Backing Shoulder Diameter

 N/A 180.000 mm7.1000 in

Housing Backing Shoulder Diameter

 N/A 224.000 mm8.800 in

Ratings

Static Radial Load Rating (C0)

 N/A 235000 lbf1040000 N

Thermal Reference Speed - Grease 

 N/A 2000 rpm
Thermal Reference Speed - Oil 3 N/A 2400 rpm

Factors

Y0 Factor4 N/A 3.05
Y1 Factor 5 N/A 3.12
Y2 Factor6 N/A 4.65
Geometry Factor (Cg) 7 N/A 0.0892
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 Maximum housing fillet radius that bearing corners will clear.
  • 3 See thermal speed ratings in the engineering section.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 Geometry constant for Lubrication Life Adjustment Factor a3l.