Part Number 22226EMW33C3, Spherical Roller Bearings - Brass Cage On The Timken Company

Longer bearing life achieved from higher capacity (vs. competitors)
Longer lubrication life achieved from lower operating temperatures due to reduced internal friction and running torque from cage guided rollers
Better contaminant purging from slots on cage face helps extend bearing life
Greater fatigue strength and increased wear resistance provide tougher protection against shock and acceleration loading from a brass cage

Unit of Measure

Key Dimensions | Other Dimensions | Ratings | Factors

Bore (d)	N/A 130 mm
O.D. (D)	N/A 9.0551 in230 mm
Width (B)	N/A 2.5197 in64 mm
Dynamic Radial Load Rating - 1M Revs (C1)	N/A 170000 lbf757000 N
e Factor ¹	N/A 0.26
UPC Code	N/A 087796136274

Max Shaft Fillet Radius²	N/A 0.100 in2.5 mm
Shaft Backing Shoulder Diameter	N/A 155 mm6.1000 in
Housing Backing Shoulder Diameter	N/A 210 mm8.300 in
Design Unit	N/A Metric
Cage Type	N/A EM
Cage Material	N/A Brass
Superseded Part	N/A 22226YMW33C3

Static Radial Load Rating (C0)	N/A 212000 lbf945000 N
Thermal Reference Speed - Oil ³	N/A 2900 rpm
Thermal Reference Speed - Grease	N/A 2400 rpm

¹ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
² Maximum housing fillet radius that bearing corners will clear.
³ See thermal speed ratings in the engineering section.
⁴ These factors apply for both inch and metric calculations. See engineering
⁵ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
⁶ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
⁷ Geometry constant for Lubrication Life Adjustment Factor a3l.

Bore (d)