The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back

Key Features

  • Longer bearing life achieved from higher capacity (vs. competitors)
  • Longer lubrication life achieved from lower operating temperatures due to reduced internal friction and running torque from cage guided rollers
  • Better contaminant purging from slots on cage face helps extend bearing life
  • Greater fatigue strength and increased wear resistance provide tougher protection against shock and acceleration loading from a hardened steel cage
Unit of Measure

Key Dimensions

Design Unit

 N/A Metric

Bore (d)

 N/A 95 mm

Lubrication Type

 N/A Industrial Grade Solid Lube

O.D. (D)

 N/A 170 mm6.6929 in

Width (B)

 N/A 43 mm1.6929 in

Dynamic Radial Load Rating - 1M Revs (C1)

 N/A 385000 N86600 lbf
e Factor 1 N/A 0.23

Cage Type

 N/A EJ

Cage Material

 N/A Steel

Factors

Maximum Operating Speed

 N/A 640 rpm
Y0 Factor2 N/A 2.82
Y1 Factor 3 N/A 2.88
Y2 Factor 4 N/A 4.29
Geometry Factor (Cg) 5 N/A 0.067

Other Dimensions

Max Shaft Fillet Radius6 N/A 2.0 mm0.080 in

Shaft Backing Shoulder Diameter

 N/A 114.0 mm4.5000 in

Housing Backing Shoulder Diameter

 N/A 155 mm6.100 in

Abutment and Fillet Dimensions

r - Outer Ring "To Clear" Radius7 N/A 2 mm0.08 in

Ratings

Static Radial Load Rating (C0)

 N/A 441000 N99000 lbf
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 These factors apply for both inch and metric calculations. See engineering
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 Geometry constant for Lubrication Life Adjustment Factor a3l.
  • 6 Maximum housing fillet radius that bearing corners will clear.
  • 7 These maximum fillet radii will be cleared by the bearing corners.