The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back

Key Features

  • Longer bearing life achieved from higher capacity (vs. competitors)
  • Longer lubrication life achieved from lower operating temperatures due to reduced internal friction and running torque from cage guided rollers
  • Better contaminant purging from slots on cage face helps extend bearing life
  • Greater fatigue strength and increased wear resistance provide tougher protection against shock and acceleration loading from a hardened steel cage
Unit of Measure

Key Dimensions

Design Unit

 N/A Metric

Bore (d)

 N/A 45 mm

Lubrication Type

 N/A Industrial Grade Solid Lube

O.D. (D)

 N/A 100 mm3.937 in

Width (B)

 N/A 36 mm1.4173 in

Dynamic Radial Load Rating - 1M Revs (C1)

 N/A 182000 N40800 lbf
e Factor 1 N/A 0.36

Cage Type

 N/A EJ

Cage Material

 N/A Steel

Factors

Maximum Operating Speed

 N/A 1170 rpm
Y0 Factor2 N/A 1.86
Y1 Factor 3 N/A 1.9
Y2 Factor 4 N/A 2.83
Geometry Factor (Cg) 5 N/A 0.049

Other Dimensions

Max Shaft Fillet Radius6 N/A 1.50 mm0.060 in

Shaft Backing Shoulder Diameter

 N/A 58.000 mm2.300 in

Housing Backing Shoulder Diameter

 N/A 90.000 mm3.500 in

Abutment and Fillet Dimensions

r - Outer Ring "To Clear" Radius7 N/A 1.5 mm0.06 in

Ratings

Static Radial Load Rating (C0)

 N/A 190000 N42700 lbf
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 These factors apply for both inch and metric calculations. See engineering
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 Geometry constant for Lubrication Life Adjustment Factor a3l.
  • 6 Maximum housing fillet radius that bearing corners will clear.
  • 7 These maximum fillet radii will be cleared by the bearing corners.