The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

Design Unit

 N/A METRIC

Bearing Weight

 N/A 0.4 Kg1 lb

Cage Type

 N/A EM

UPC Code

 N/A 087796243835

Cage Material

 N/A Brass

Superseded Part

 N/A 22207YMW33C3

Dimensions

d - Bore

 N/A 35.00 mm1.378 in

D - Outer Diameter

 N/A 72.00 mm2.8346 in

B' - Inner Ring Width

 N/A 23 mm0.9055 in

B - Outer Ring Width

 N/A 23.000 mm0.9055 in

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 N/A 1 mm0.040 in
r - Outer Ring "To Clear" Radius2 N/A 1 mm0.040 in

da - Inner Ring Backing Diameter

 N/A 45.000 mm1.800 in

Da - Outer Ring Backing Diameter

 N/A 65.00 mm2.600 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 82000 N18500 lbf

C1(2) - Dynamic Radial Rating (Two-Rows)

 N/A 86500 N19400 lbf

Factors

e - ISO Factor3 N/A 0.31
Y0 - ISO Factor4 N/A 2.21
Y1 - ISO Factor5 N/A 3.29
Y2 - ISO Factor6 N/A 2.16

Reference Thermal Speed Rating (Grease)

 N/A 7000
Reference Thermal Speed Rating (Oil)7 N/A 8700
Cg - Geometry Factor8 N/A 0.041
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 See thermal speed ratings in the engineering section.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.